Outback F4-2.5L (2008)
Air Door Actuator / Motor: Service and Repair
Actuator
REMOVAL
1. MODE DOOR ACTUATOR
Disconnect the connector, remove the screw, and then remove the mode door actuator from the heater and cooling unit.
2. INTAKE DOOR ACTUATOR
Disconnect the connector, remove the screw, and then remove the intake door actuator from the blower motor unit.
3. AIR MIX DOOR ACTUATOR (AUTO A/C MODEL)
Disconnect the connector, remove the screw, and then remove the air mix door actuator from the heater and cooling unit.
-
Driver's side
-
Passenger's side
INSTALLATION