Outback F4-2.5L (2008)
Center Mounted Brake Lamp: Service and Repair
High-mounted Stop Light
REMOVAL
1. SEDAN MODEL
1. Disconnect the ground cable from battery.
2. Push the high-mounted stop light towards the rear of the vehicle (1), raise the rear end (2) and remove the clips to remove the stop light.
3. Remove the harness from the clamp.
4. Disengage two claws (A), pull out the high-minded stop light from the cover and remove claw (B).
5. Disengage the three claws and remove lens (A).
6. Remove the bulb.
2. WAGON MODEL