Outback F4-2.5L (2008)
Seat Belt Tensioner: Service and Repair
Pretensioner Connector
PROCEDURE
1. AIRBAG CONTROL MODULE
1. How to disconnect:
Press the lock lever plate (A) and pull out the lock lever.
2. How to connect:
Insert the connector, push the lock lever in securely.
CAUTION: Be sure to insert the connector in until it is locked. Then pull it lightly to make sure that it is locked.
2. DRIVER'S AIRBAG MODULE, PRETENSIONER AND CURTAIN AIRBAG MODULE
1. How to disconnect:
1. Using a flat tip screwdriver, pry the push lock upward to unlock.
2. Pull the connector to disconnect from the driver's airbag module assembly or the retractor assembly.
2. How to connect:
Connect the connector in the reverse order of disconnecting. At this time, be sure to insert the push lock until a clicking sound is heard.
CAUTION:
-
Be sure to insert the connector in until it is locked. Then pull it lightly to make sure that it is locked.
-
Be sure to push the push lock in securely.
