Outback F4-2.5L (2008)
Wiper Blade: Removal and Replacement
Wiper Blade
REMOVAL
CAUTION: When replacing the wiper blade, if standing up the wiper arm, be sure to stand up the driver's side wiper arm first, and then
passenger's side wiper arm next. Also, when putting the wiper arms back, be sure to start with passenger's side first, then driver's side next.
Doing this in the reverse order may result in the driver's side wiper blade hitting the passenger's side wiper arm and causing damage.
1. FRONT
While pushing the locking clip (A) up, pull out the blade to the direction of the arrow and remove it from the wiper arm.
2. REAR
Turn the blade in the direction of arrow (A) and remove it from arm.
INSTALLATION
1. Install in the reverse order of removal.
2. Confirm that the clip is locked securely.
