Outback F4-2.5L (2008)
2. Connect the battery to the connector. (Terminal No.17 - (+), terminal No.2 & 16 - (-))
3. Turn the wiper switch to INT.
4. Connect the battery (+) to the terminal No.16 for 5 seconds.
5. Connect the battery (-) to the terminal No.16, and check the voltage between terminal No.7 - No.2 when performing the intermittent
operation.
6. Perform step 1) to 5) when intermittent control switch is in MIN or MAX. If operation is not as specified, replace the switch.
Intermittent stationary time
MIN: Approx. 2 seconds
MAX: Approx. 16 seconds
3. REAR WIPER
1. Check with Subaru Select Monitor
Step 1-2
2. Check rear wiper motor circuit