Outback F4-2.5L DOHC Turbo (2006)
NOTE: After all bolts are removed, raise the whole bumper beam a little to remove it from vehicle body.
7. Remove the bolts and nuts, and disassemble the bumper beam.
9. Glove the under cover.
9. Remove the bolts and clips, and remove the radiator guide.
INSTALLATION
1. FRONT BUMPER FACE
1. Install in the reverse order of removal.
2. Fit the slider (A) to the guide plate (B) securely.
2. FRONT BUMPER BEAM ASSEMBLY
Install in the reverse order of removal.
Tightening torque: Refer to "COMPONENT" of "General Description". <Ref. to FRONT BUMPER, COMPONENT, General