Outback F4-2.5L DOHC Turbo (2006)
Trim Panel: Service and Repair
Rear Quarter Trim
REAR QUARTER TRIM
REMOVAL
1. SEDAN MODEL
1. Remove the rear seat.
2. Turn over the trim, and remove the quarter trim rear by pressing the claw (A) of metal clip using flat tip screwdriver or the like.
CAUTION: When metal clip is removed or damaged, replace the bolt of trim and metal clip with new ones.
3. Remove the cap on the upper side of trim, and remove the bolt inside.
4. Remove the bolts (A), and remove the quarter trim (front).