Outback F4-2.5L DOHC Turbo (2006)
camshaft caps and cylinder head as a set.
7
Completely remove the plastigauge.
5. Check the cam face condition, and remove the minor faults by grinding with oil stone. Measure the cam height H. If it exceeds the limit or has
partial wear, replace it.
Cam height H:
Standard
Intake 46.55 - 46.65 mm (1.833 - 1.837 inch)
Exhaust 46.75 - 46.85 mm (1.841 - 1.844 inch)
6. Measure the side clearance of camshaft with dial gauge. If the clearance exceeds the limit or has partial wear, replace the caps and cylinder head as
a set. If necessary, replace the camshaft.