Outback F4-2.5L DOHC Turbo (2006)
CAUTION: When lifting up the vehicle, raise up wire ropes at the same time.
12. Remove the under cover.
13. Drain engine oil.
14. Remove the front exhaust pipe.
15. Remove the nuts which install front cushion rubber onto front crossmember.
16. Remove the bolts which install oil pan on cylinder block with the engine raised up.
17. Insert the oil pan cutter blade into the clearance between cylinder block and oil pan.
CAUTION: Do not use a screwdriver or similar tool in place of oil pan cutter.
18. Remove the oil strainer.
19. Remove the baffle plate.
INSTALLATION
CAUTION: Before installing the oil pan, wipe clean the oil pan and the mating face of engine block.
