Outback F4-2.5L DOHC Turbo (2006)
Air Filter Element: Service and Repair
Air Cleaner Element
REMOVAL
1. Disconnect the ground cable from battery.
2. Disconnect the connector (A) from the mass air flow sensor.
3. Loosen the clamp (B) which connects the air intake boot and intake duct.
4. Remove the clip (C) from the air cleaner case.
5. Remove the air cleaner case (rear) and air intake boot.
6. Remove the air cleaner element.
INSTALLATION
Install in the reverse order of removal.
NOTE: When installing the air cleaner case (rear), align the protrusion of the air cleaner case (rear) to the hole on the air cleaner case (front) to install.