Outback F4-2.5L DOHC Turbo (2006)
Gear Sensor/Switch: Service and Repair
Switches and Harness
REMOVAL
BACK-UP LIGHT SWITCH AND NEUTRAL POSITION SWITCH
1. Disconnect the ground cable from battery.
2. Remove the air intake chamber and cleaner case. (Non-turbo model)
3. Remove the intercooler. (Turbo model)
4. Disconnect the connectors of back-up light switch and neutral position switch.
^
Non-turbo model
^
Turbo model
5. Lift-up the vehicle.
6. Remove the back-up light switch and neutral position switch with harness.
INSTALLATION
BACK-UP LIGHT SWITCH AND NEUTRAL POSITION SWITCH