Outback F4-2.5L SOHC (2005)
Note:
If the catalyst readings (RH or LH) are zero, something during the 50mph driving cycle occurred to stop the catalyst test. This could be from not
maintaining a speed over 50mph, not keeping the throttle steady, etc. Repeat the driving test cycle.
Once the deterioration index for catalyst 1 (RH) and catalyst 2 (LH) have been determined, proceed as follows:
Plot the intersection of the RH and LH deterioration indexes in the appropriate position of the following Catalyst Deterioration Chart. Determine the
correct repair procedure identified in the corresponding field found on the chart and proceed accordingly. In all cases, the ECM
should be reprogrammed with the updated Pack File.
Note:
If the index coordinates intersect directly on the line between Field's proceed as follows:
"A" and "B", Reprogram ECM only.
"A" and "C", Reprogram ECM only.
"B" and "C", replace right catalytic converter only.
"B" and "D", replace right catalytic converter only.
"C" and "D", replace left catalytic converter only.