Subaru Workshop Service and Repair Manuals

Fuel Gauge Sender: Service and Repair
Fuel Level Sensor

2.5L SOHC

Fuel Level Sensor

REMOVAL

WARNING:

-

Place "NO FIRE" signs near the working area.

-

Be careful not to spill fuel on the floor.

NOTE:  Fuel level sensor is built in fuel pump assembly.

1. Remove the fuel pump assembly.
2. Disconnect the connector from fuel pump bracket.

3. Remove the fuel level ensor and the fuel temperature sensor.

INSTALLATION

Install in the reverse order of removal.

2.5L SOHC U5/Low Emission

Fuel Level Sensor

REMOVAL

WARNING:

-

Place "NO FIRE" signs near the working area.

-

Be careful not to spill fuel on the floor.

NOTE:  Fuel level sensor is built in fuel pump assembly.

1. Remove the fuel pump assembly.
2. Disconnect the connector from fuel pump bracket.