Outback F4-2.5L SOHC (2005)
Ignition Cable: Customer Interest
Ignition System - DTC's P0301/P0302/P0303/P0304
NUMBER: 07-60-07R
DATE: 04/25/07
APPLICABILITY:
2000MY and Later Legacy/Outback
25L SOHC Vehicles
1999MY and Later Impreza and
Forester 25L SOHC Vehicles
SUBJECT:
Ignition Coil and High Tension Cables
INTRODUCTION
When diagnosing for misfire code(s) P0301 P0302 P0303 and/or P0304 there is the possibility that the ignition coil and/or high tension cables could be
the cause In addition to the information published in the service manual, use the following procedure to check the ignition coil and high tension cables.
PRODUCTION LINE CHANGE
The new style high tension cables have been used in production with the VINs shown.
REPAIR PROCEDURE/INFORMATION
Step 1) Ignition Coil Inspection
Check the tower portion of the ignition coil for carbon tracks (leakage) If leakage is more than 5mm long, the ignition coil and high tension cables should
be replaced (see Figure 1).
Step 2) High Tension Cable Inspection