Outback F4-2.5L SOHC (2005)
Fuel Level Sensor: Service and Repair
Fuel Level Sensor
2.5L SOHC
Fuel Level Sensor
REMOVAL
WARNING:
-
Place "NO FIRE" signs near the working area.
-
Be careful not to spill fuel on the floor.
NOTE: Fuel level sensor is built in fuel pump assembly.
1. Remove the fuel pump assembly.
2. Disconnect the connector from fuel pump bracket.
3. Remove the fuel level sensor and the fuel temperature sensor.
INSTALLATION
Install in the reverse order of removal.
2.5L SOHC U5/Low Emission
Fuel Level Sensor
REMOVAL
WARNING:
-
Place "NO FIRE" signs near the working area.
-
Be careful not to spill fuel on the floor.
NOTE: Fuel level sensor is built in fuel pump assembly.
1. Remove the fuel pump assembly.
2. Disconnect the connector from fuel pump bracket.