Outback F4-2.5L SOHC (2005)
Throttle Body: Service and Repair
2.5L SOHC U5/Low Emission
Throttle Body
REMOVAL
1. Disconnect the ground cable from battery.
2. Remove the air intake chamber.
3. Disconnect the connectors from the throttle position sensor and manifold absolute pressure sensor.
4. Disconnect the engine coolant hoses (A) from throttle body.
5. Remove the bolts (B) which secure throttle body to intake manifold.
INSTALLATION
Install in the reverse order of removal.
NOTE: Use a new gasket.
Tightening torque: 8 N.m (0.8 kgf-m, 5.9 ft-lb)