Outback F4-2.5L SOHC (2005)
4. Tighten the three inhibitor switch securing bolts using ST.
ST 499267300 STOPPER R PIN N
Tightening torque: 3.5 Nm (0.36 kgf-cm, 2.6 ft. lbs.)
5. Install the select cable to range select lever.
6. Install the plate assembly to transmission.
Tightening torque:
T: 25 Nm (2.5 kgf-cm, 18 ft. lbs.)
7. Install the washer and snap pin to range select lever.
8. Install the front and center exhaust pipe.
9. Lower the vehicle.
10. Install the inhibitor switch connector to the stay.