Outback F4-2.5L SOHC (2005)
7. Disconnect the ATF cooler pipe from frame.
8. Remove the oil cooler inlet and outlet pipes.
NOTE: When disconnecting the outlet pipe, be careful not to lose the ball and spring used with retaining screw.
U5 MODEL
1. Set the vehicle on a lift.
2. Remove the battery.
3. Lift-up the vehicle.
4. Remove the under cover.
5. Disconnect the ATF cooler hose from radiator.
NOTE:
^
Do not use a screwdriver or other pointed tools.
^
When hard to remove the hose, wrap the hose with cloth to prevent from damaging, and then turn with pliers and pull out with hand straightly.