Outback F4-2.5L SOHC (2005)
2. Install the ATF cooler pipe to frame.
3. Connect the ATF cooler hose to pipe on the transmission side.
NOTE:
^
Install so that the hose is not folded over, excessively bent or twisted.
^
Be careful to insert the hose to the specified position.
4. Connect the ATF cooler hose to ATF filter.
NOTE:
^
Install so that the hose is not folded over, excessively bent or twisted.
^
Be careful to insert the hose to the specified position.
5. Install the headlight assembly.
