subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Wheel Bearing > < Front Drive Shaft Removal|Page 4063
Page 11
background image

NOTE:  Be careful so that the end of the band is in close contact with clip.

18. Install the BJ boot or EBJ boot in the same procedure as DOJ boot.
19. Extend and retract the DOJ to provide equal grease coating.

Front Drive Shaft Inspection

Front Drive Shaft

INSPECTION

Check the removed parts for damage, wear, corrosion etc. If faulty, repair or replace.
^

PTJ (pillow tripod joint) Check for seizure, corrosion, damage, wear and excessive play.

^

EBJ (high-efficiency compact ball fixed joint) Check for seizure, corrosion, damage and excessive play.

^

Shaft Check for excessive bending, twisting, damage and wear.

^

Boot
Check for wear, warping, breakage and scratches.

^

Grease  
Check for discoloration and fluidity.

Rear Drive Shaft Inspection

Rear Drive Shaft

INSPECTION

Check the removed parts for damage, wear, corrosion etc. Repair or replace if defective.
^

DOJ (Double Offset Joint)
Check for seizure, corrosion, damage, wear and excessive play.

^

EBJ (high-efficiency compact ball fixed joint)
Check for seizure, corrosion, damage, wear and excessive play.

^

Shaft 
Check for excessive bending, twisting, damage and wear.

^

BJ (Bell Joint) 
Check for seizure, corrosion, damage and excessive play.

^

Boot
Check for wear, warping, breakage and scratches.

^

Grease 
Check for discoloration and fluidity.

Wheel Bearing > < Front Drive Shaft Removal|Page 4063