Outback F4-2.5L SOHC (2005)
![background image](/subaru/outback/f4-2.5l_sohc/Page-1291002.png)
15. Remove the transmission rear crossmember bolt.
16. Lower the transmission jack.
NOTE: Do not separate the transmission jack and transmission.
17. Remove the oil cooler inlet and outlet pipes.
NOTE: When removing the outlet pipe, be careful not to lose the ball and spring used with retaining screw.
18. Remove the front vehicle speed sensor and torque converter turbine speed sensor.
19. Disconnect the connector from rear vehicle speed sensor.
20. Remove the oil pan.