Outback F6-3.0L (2003)
8. Remove connector and remove oil cooler.
INSPECTION
1. Check that coolant passages are not clogged using air blow method.
2. Check upper oil pan and the installation surface of oil filter O-ring for damage.
INSTALLATION
1. Install oil cooler on upper oil pan with connector pipe.
Tightening torque: T: 54 Nm (5.5 kgf-m, 39.8 ft. lbs.)
NOTE: Always use a new O-ring.
2. Install oil filter using ST.
ST 498547000 OIL FILTER WRENCH
3. Install water hose.