Outback F6-3.0L (2003)
27. Remove bolts which holds intake manifold onto cylinder heads.
28. Remove intake manifold.
INSTALLATION
1. Install intake manifold onto cylinder heads.
NOTE: Always use new gaskets.
Tightening torque: 25 N.m (2.5 kgf-m, 18.1 ft-lb)
2. Install the bolt (B), which holds fuel injector pipe RH onto cylinder head.
Tightening torque: 19 N.m (1.9 kgf-m, 14 ft-lb)
3. Connect air assist hose (A).