Outback F6-3.0L (2003)
CAUTION:
^
When disconnecting pipe C-D, use two wrenches to prevent deformities.
^
Be careful to keep pipe connections free from foreign matter.
2.5 L model
Disconnect pipe C from oil pump. Disconnect pipe D from return hose.
CAUTION:
^
Do not allow fluid from the hose end to come into contact with pulley belt.
^
To prevent foreign matter from entering the hose and pipe, cover the open ends of them with a clean cloth.
3.0 L model
Disconnect pressure hose from oil pump. Disconnect return hose from reservoir tank.
CAUTION:
^
Do not allow fluid from the hose end to come into contact with pulley belt.
^
To prevent foreign matter from entering the hose and pipe, cover the open ends of them with a clean cloth.
INSTALLATION
1. Tighten bolt A.
CAUTION: Visually check that hose between tank and pipe D is free from bending or twisting.
2.5 L model
3.0 L model