Outback F6-3.0L (2003)
Wheels: Service and Repair
Aluminum Wheel
Aluminum Wheel
REMOVAL
Refer to Steel Wheel for removal procedure of aluminum wheels. See: Steel Wheel
INSTALLATION
Refer to Steel Wheel for installation procedure of aluminum wheels.
INSPECTION
Refer to Steel Wheel for inspection procedure of aluminum wheels.
Steel Wheel / Rim Runout
Rim runout:
CAUTION: Aluminum wheels are easily scratched. To maintain their appearance and safety, do the following:
1) Do not damage aluminum wheels during removal, disassembly, installation, wheel balancing, etc. After removing aluminum wheels, place them on
a rubber mat, etc.
2) While vehicle is being driven, be careful not to ride over sharp obstacles or allow aluminum wheels to contact the shoulder of the road.
3) When installing tire chain, be sure to install it properly not to have a slack; otherwise it may hit wheel while driving.
4) When washing aluminum wheel, use neutral synthetic detergent and water. Avoid using the cleanser including abrasive, hard brushes or an
automatic car washer.
