Outback F6-3.0L (2003)
Impact Sensor: Service and Repair
Sensor Connectors
Front Sub-Sensor
FRONT SUB-SENSOR, SIDE AIRBAG SENSOR
HOW TO DISCONNECT
1. Holding outer part (A), pull it in the direction of the arrow.
CAUTION: When pulling, be sure to hold onto the connector and not the wire.
HOW TO CONNECT
Holding the connector, and push it in carefully until a connecting sound is heard.
CAUTION: Outer (A) moves back, and so do not put your hand on the outer part.
Be sure to insert the connector in until it locks. Then pull on it gently to make sure that it is locked.
Front Sub-Sensor and Pretensioner
DRIVER'S AIRBAG, PASSENGER'S AIR-BAG, SIDE AIRBAG, FRONT SUB SENSOR HARNESS TO AIRBAG MAIN HARNESS AND
PRETENSIONER
How to disconnect:
1. Push lock arm (A).
2. With lock arm (A) pushed in, move slide lock (B) in the direction of the arrow.