Outback F6-3.0L (2003)
Roll Connector: Service and Repair
Connector For Steering Roll Connector
DRIVER'S AIRBAG (AIRBAG MAIN HARNESS AND ROLL CONNECTOR), SIDE AIR-BAG, FRONT SUB SENSOR HARNESS TO
AIRBAG MAIN HARNESS AND PRETENSIONER
HOW TO DISCONNECT
1. Push lock arm (A)
2. With lock arm (A) pushed in, move slide lock (B) in the direction of the arrow
3. With slide lock (B) pulled, remove lock arm (A) to its original position, and then pull in the direction of the arrow and separate the connector.
CAUTION: When pulling, be sure to hold onto the connector and not the wire.
HOW TO CONNECT
Holding the connector, and push it in carefully until a connecting sound is heard.
CAUTION: Be sure to insert the connector in until it locks. Then pull on it gently to make sure that it is locked.
