Outback F6-3.0L (2003)
5. After confirmation of the ABS sensor clearance, connect connector to ABS sensor and install fuel tank cover.
6. Connect connector to battery ground cable.
INSPECTION
ABS SENSOR
1. Check pole piece of ABS sensor for foreign particles or damage. If necessary, clean pole piece or replace ABS sensor.
2. Measure ABS sensor resistance.
CAUTION: If resistance is outside the standard value, replace ABS sensor with new one.
NOTE: Check ABS sensor cable for discontinuity. If necessary, replace with a new one.
SENSOR GAP
1. Measure the distance "A" between ABS sensor surface and sensor pole face.