Outback F6-3.0L (2003)
Power Steering Fluid Reservoir: Service and Repair
Reservoir Tank
REMOVAL
2.5 L MODEL
1. Drain fluid from the reservoir tank.
2. Disconnect pipe D from return hose and suction hose from oil pump.
CAUTION:
^
Do not allow fluid from the hose end to come into contact with pulley belt.
^
To prevent foreign matter from entering the hose and pipe, cover the open ends of them with a clean cloth.
3. Remove reservoir tank from bracket by pulling it upwards.
3.0 L MODEL
1. Drain fluid from the reservoir tank.
2. Disconnect return hose and suction hose from reservoir tank.
CAUTION:
^
Do not allow fluid from the hose end to come into contact with pulley belt.
^
To prevent foreign matter from entering the hose, cover the open ends of them with a clean cloth.
3. Remove reservoir tank from bracket by pulling it upwards.
INSTALLATION
2.5 L MODEL
1. Install reservoir tank to bracket.
2. Connect pipes D to return hose and suction hose to oil pump.