Outback F6-3.0L (2003)
![background image](/subaru/outback/f6-3.0l/Page-1218017.png)
Spray time of anti-rust wax and length of the spray nozzle to be inserted into the sub-frame corresponding holes are described as shown.
CROSSMEMBER FRONT (A)
Insert the 360° spray nozzle into hole (A) at right side of the crossmember front until it touches the outer tube of the other side bushing. Spray anti-rust
wax for 12 sec. while pulling the spray nozzle back to the original opening.
Spray time: 12 sec.
CROSSMEMBER FRONT (B)
Insert the 360° spray nozzle into hole (B) at left side of the crossmember front until it touches the outer tube of the other side bushing. Spray anti-rust
wax for 12 sec. while pulling the spray nozzle back to the original opening.