subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Wheels and Tires|Wheels > < Tires - Tire Pressure Monitoring System
Page 1
background image

Spare Tire: Service and Repair

"T-type" Tire 

NOTE 

"T-type" tire for temporary use is prepared as a spare tire

CAUTION: 
^

Do not use a tire chain with the "T-type" tire. Because of the smaller tire size, a tire chain will not fit properly and will result in damage to the
vehicle and the tire.

^

Do not drive at a speed greater than 80 km/h (50 MPH).

^

Drive as slowly as possible and avoid passing over bumps.

REPLACEMENT 

Refer to Removal and Installation of Steel Wheel for removal/installation of "T-type" tires

CAUTION: Replace with a conventional tire as soon as possible since the "T-type" tire is only for temporary use.

INSPECTION 

1. Check tire inflation pressure

Specification: 420 kPa (4.2 kg/cm2, 60 psi) 

2. Take stones, glass, nails, etc. out of the tread groove
3. Check tires for deformation, cracks, partial wear, or wear

CAUTION:  Replace the tire with a new one.

Wheels and Tires|Wheels > < Tires - Tire Pressure Monitoring System