Outback F6-3.0L (2003)
9. Install air breather hose.
10. Install oil cooler pipes.
11. Install the oil charger pipe with O-ring.
12. Insert the input shaft while turning lightly by hand. At this time, not to damage the bushing.
Normal protrusion A: 50 - 55 mm (1.97 - 2.17 inch)
13. Install the torque converter clutch assembly.
14. Install the transmission assembly to the vehicle.
DISASSEMBLY
1. Remove the snap ring, and take out the retaining plate, drive plates, driven plates.
2. Remove snap ring, and take out the retaining plate, drive plates and driven plates.