Outback F6-3.0L (2003)
2. Install high clutch piston to reverse clutch piston.
3. Install reverse clutch to high clutch drum. Align the groove on the reverse clutch piston with the groove on the high clutch drum during
installation.
4. Install spring retainer to high clutch piston.
5. Install ST to high clutch piston.
ST 498437000 HIGH CLUTCH PISTON GAUGE
6. Avoid folding the high clutch piston seal, when installing the cover to high clutch piston.
7. Using ST1 and ST2, install snap ring.
ST1 398673600 COMPRESSOR
ST2 498627100 SEAT
ST3 498437000 HIGH CLUTCH PISTON GAUGE