Outback F6-3.0L (2003)
3. Install two seal rings to one-way clutch inner
ONE-WAY CLUTCH OUTER RACE
1. Install the needle bearing, and secure with the snap ring.
2. Install the one-way clutch, one-way clutch inner race and secure with the snap ring
3. Set the inner race. Make sure that the forward clutch is free in the clockwise direction and locked in the counterclockwise direction, as viewed
from the front of the vehicle.
INSPECTION
^
Make sure the snap ring is not worn and the seal rings are not damaged.
^
Measure the total end play and adjust to within specifications.