Outback F6-3.0L (2003)
^
Insert the clutch assembly fully into position until the bearing shoulder bottoms.
VTD MODEL
1. Press new oil seal using ST and a press.
ST 498057300 INSTALLER
2. Press dust cover.
3. Install the transfer clutch pipe onto the extension case, taking care not to bend the pipe.
4. Install the test plug.
Tightening torque: 13 Nm (1.3 kgf-m, 9.4 ft. lbs.)
5. Insert the multi-plate clutch, drive plates, driven plates, and spring retainer.
6. Install the snap ring using special tools 1, 2, and 3.
ST1 398673600 Compressor
ST2 498627100Seat
ST3 398663600 Pliers
INSPECTION
