subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Wheel Bearing > < Front Drive Shaft Removal|Page 2839
Page 12
background image

18. Fix up boot on BJ in the same manner.

NOTE: Extend and retract DOJ to provide equal grease coating.

Rear Drive Shaft Inspection

INSPECTION 

Check the removed parts for damage, wear, corrosion etc. If faulty, repair or replace.

1. DOJ (Double Offset Joint)

^

Check seizure, corrosion, damage, wear and excessive play.

2. SFJ (Shudder-less Free-ring tripod Joint)

^

Check seizure, corrosion, damage and excessive play.

3. Shaft

^

Check excessive bending, twisting, damage and wear.

4. BJ (Bell Joint)

^

Check seizure, corrosion, damage and excessive play.

5. Boot

^

Check for wear, warping, breakage or scratches.

6. Grease

^

Check for discoloration or fluidity.

Wheel Bearing > < Front Drive Shaft Removal|Page 2839