Outback F6-3.0L DOHC (2006)
Intake Manifold: Service and Repair
Disassembly and Assembly
Intake Manifold
DISASSEMBLY
1. Remove the engine harness from intake manifold.
2. Remove the throttle body.
3. Disconnect the pressure regulator vacuum hose from intake manifold.
4. Remove the manifold absolute pressure sensor.
5. Remove the purge control solenoid valve.
6. Loosen the clamp which holds fuel injector pipe to fuel hose, and then disconnect the pipe from fuel hose.
7. Remove the bolts which install fuel pipes on intake manifold.