Outback F6-3.0L DOHC (2006)
Tightening torque: 6.4 Nm (0.65 kgf-m, 4.7 ft. lbs.)
NOTE: Use a new installing bolt.
6
Install the chain tensioner (RH).
7
Adjust the clearance between chain guide (RH) and chain guide (center) within 8.4 - 8.6 mm (0.331 - 0.339 inch). Install the chain guide
(center).
8
Check that each mark on the sprocket and timing chain is matched, and then draw out the stopper pin from chain tensioner.
