Refrigerant: Specifications (page 4 of 4)
- Make
- Subaru
- Model
- Outback F6-
- Engine
- 3.0L DOHC
- Year
- 2006
- Section
- Fluids › Refrigerant
MaintenanceSpecifications · page 4 of 4
11. Turn the ignition key to ON position, and run the blower at high speed for approx. 1 minute. Stop the blower to check the ventilation grille on the
instrument panel. While moving the tester closer to the grille, run the blower for 1 or 2 seconds, then stop it. Check the grille at that point for at
least 10 seconds.
12. Check the valve in the service port.
13. Visually check the rubber seal in the service port cap.
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 2006 Subaru Outback 3.0L
- TOOLA/C manifold gauge setSearch: AC manifold gauge set
- TOOLUV leak detection kitSearch: AC UV leak detection kit
- PARTCabin filterSearch: Subaru Outback 2006 3.0L cabin filter
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.