subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Airbag Systems|Page 5384 > < Airbag Systems|Page 5382
Page 3
background image

-

Side airbag or curtain airbag is deployed. (operating side)

8. ROLL CONNECTOR

Check for the following, and replace the damaged parts with new parts.
-

Combination switch or steering roll connector is cracked or deformed.

9. STEERING SHAFT

Check for the following, and replace the damaged parts with new parts.

-

Overall length of steering column should be within specifications.

10. DRIVER'S SEAT

Check the following items and replace the faulty parts with new one.
-

Seatbelt buckle switch or seat position sensor body/bracket is cracked or deformed.

-

Harness and/or connector is cracked, deformed or open. Harness wire is exposed.

11. PASSENGER'S SEAT

1. Check the following items and replace the faulty parts with new one.

-

Seatbelt buckle switch body/bracket for scratch, crack or deformation

-

Backrest frame for crack or deformation

-

Headrest for deformation or play

CAUTION:
-

Never disassemble the following items. Always check with seat cushion frame assembly.

-

Seat cushion frame and seat rail for crack or deformation

-

Occupant detection system unit or each load sensor for scratch, crack or deformation

-

Harness and/or connector is cracked, deformed or open. Harness wire is exposed.

2. After checking the installing condition of passenger's seat, perform the system calibration of occupant detection system.

Airbag Systems|Page 5384 > < Airbag Systems|Page 5382