Outback F6-3.0L DOHC (2006)
2. Remove the cover (A) from roof trim, and then inset it to the inside of roof trim.
3. Remove the clips, and then lower the roof trim end.
CAUTION: When removing the roof trim clip, do not pull the roof trim end backward with excessive force, otherwise roof trim may be
damaged.
4. Remove the bolt to remove seat belt retractor.
6. CENTER SEAT BELT RH ASSEMBLY AND LH ASSEMBLY (WAGON MODEL)
1. Remove the rear seat cushion.
2. Remove the bolts, and then detach the center seat belt assembly.
INSTALLATION
1. OUTER SEAT BELT RH ASSEMBLY AND LH ASSEMBLY (SEDAN MODEL)
Install in the reverse order of removal.
