Outback F6-3.0L DOHC (2006)
1. Using the ST, form the seal ring properly
ST1 34199AG080 FORMER PISTON
ST2 34199AG050 GUIDE G (24)
2. Using ST-B and ST-C, install the oil seal to ST-A.
ST 927490000 INSTALLER A, B, C
NOTE: Face the oil seal in the direction as shown in the figure.
3. Insert the ST-A with oil seal assembled from the gear side of rack. Remove the oil seal from ST-A near piston, and then remove the ST-A from
rack.
