Outback F6-3.0L DOHC (2006)
Control Arm: Service and Repair
Rear Suspension
Rear Arm
Rear Arm
REMOVAL
1. Lift-up the vehicle, and then remove the rear wheels.
2. Remove the sub frame support arm.
3. Remove the bearing unit.
4. Hang the back plate from sub frame.
5. Remove the bolts which secure the parking brake cable clamp to rear arm bracket.
6. Remove the bolt which hold the brake hose bracket and ABS wheel speed sensor bracket to rear arm.
7. Remove the bolts which secure the brake hose bracket to rear arm. Remove the bolts which secure the ABS wheel speed sensor to rear arm.