Outback F6-3.0L DOHC (2006)
8. Disconnect the ATF cooler pipe from frame.
9. Remove the oil cooler inlet and outlet pipes.
NOTE: When disconnecting the outlet pipe, be careful not to lose the ball and spring used with retaining screw.
INSTALLATION
1. Install the oil cooler inlet and outlet pipes with new washer.
Tightening torque:
T1: 25 Nm (2.5 kgf-cm, 18 ft. lbs.)
T2: 41 Nm (4.2 kgf-cm, 30.4 ft. lbs.)
T3: 45 Nm (4.6 kgf-cm, 33.2 ft. lbs.)