Outback F6-3.0L DOHC (2006)
Wiper Motor Linkage: Testing and Inspection
Front Wiper Motor and Link
INSPECTION
1. When the battery is connected to the terminal of connectors, confirm that the wiper motor operates at low speed.
2. When the battery is connected to the terminal of connectors, confirm that the wiper motor operates at high speed.
3. Connect the battery to terminals of connector, and remove the terminal connection with wiper motor rotated at low speed, and stop the wiper
motor through operation.
4. Connect the battery and confirm that the wiper motor stops at automatic stop position after the wiper motor operates at low speed again.
