Outback L.L.Bean Edition AWD F6-3.0L (2002)
Front Door Exterior Handle: Service and Repair
Front Outer Handle
REMOVAL
1. Remove the door trim. <Ref. to REMOVAL, Front Door Trim.>
2. Remove the sealing cover. <Ref. to REMOVAL, Front Sealing Cover.>
3. Remove the front door latch assembly. <Ref. to REMOVAL, Front Door Latch Assembly.>
4. Remove the two rod joints.
5. Remove the two bolts. Remove the front outer handle (A).
CAUTION: Do not use excessive force to remove the door panel. This will deform it.
INSTALLATION
Install in the reverse order of removal.
NOTE: Make sure the outer handle works properly after installation.
INSPECTION
1. Make sure the rod is not deformed.
2. Make sure the lever and rod work smoothly.
