Outback L.L.Bean Edition AWD F6-3.0L (2002)
5. Remove nuts which secure relay box, and remove relay box and connector bracket.
CAUTION: Do not drop or bump relay box.
INSTALLATION
1. HYDRAULIC UNIT (H/U)
1. Install hydraulic unit.
Tightening torque: 18 Nm (1.8 kgf-m, 13.0 ft. lbs.)
2. Connect hydraulic unit ground cable to body.
Tightening torque: 33 Nm (3.4 kgf-m, 25 ft. lbs.)
3. Connect brake pipes to their correct hydraulic unit connections.
4. Secure hydraulic unit connector to connector bracket.
CAUTION: Align connector with mating receptacle.
5. Connect connector to hydraulic unit.
6. Install air intake duct.
7. Connect ground cable to battery.
8. Bleed air from the brake system.
2. RELAY BOX
