Outback L.L.Bean Edition AWD F6-3.0L (2002)
1) Install oil strainer onto baffle plate.
CAUTION: Replace O-ring with a new one.
Tightening torque: 6.4 Nm (0.65 kgf-m, 4.7 ft. lbs.)
2) Apply fluid packing to mating surfaces and install oil pan.
Fluid packing: THREE BOND 1280B
Fluid packing application diameter: 5.0 ± 1.0 mm (0.197 ± 0.039 inch)
3) Tighten the lower oil pan mounting bolts in the numerical sequence shown in the figure.
Tightening torque: 6.4 Nm (0.65 kgf-m, 4.7 ft. lbs.)
4) Install under cover.
5) Fill engine oil.
