Outback L.L.Bean Edition AWD F6-3.0L (2002)
Timing Chain: Service and Repair
Front Chain Cover
REMOVAL
1) Remove crankshaft pulley.
2) Remove front chain cover.
NOTE: There are four different types of chain cover mounting bolts. Sort them into separate containers to avoid confusion at installation.
INSTALLATION
1) Remove old fluid packing on the matching surface, and degrease it.
2) Apply fluid packing to the mating surface of front chain cover.
Fluid packing: THREE BOND 1280B
Fluid packing application diameter: 2.5 ± 0.5 mm (0.098 ± 0.0197 inch)
3) Install front chain cover. Temporarily tighten the bolts.
NOTE: Do not confuse the mounting positions of the bolts.
