Outback L.L.Bean Edition AWD F6-3.0L (2002)
6. Connect connector to rear oxygen sensor connector.
7. Install front oxygen A/F sensor harness to the clips attached to the cylinder head covers.
8. Install under cover.
9. Lower the vehicle.
10. Connect front oxygen (A/F) sensor connector.
11. Install air cleaner case and air intake duct. <Ref. to INSTALLATION, Air Cleaner.> and <Ref. to INSTALLATION, Air Intake Duct.>
12. Install battery.
INSPECTION
1. Make sure there are no exhaust leaks from connections and welds.
2. Make sure there are no holes or rusting.
